Plywood Manufacturer & Supplier in Haryana

Made in Haryana, supplied across the state

MRS Woodcraft's factory is on Dehkora Sampla Road in Jhajjar district, near Bahadurgarh. For over three decades we have manufactured plywood, block boards, flush doors and decorative veneers here, and Haryana is our home market.

Haryana is also home to Yamunanagar, one of India's best-known plywood centres. Alongside our own production, we supply plywood made at a partner unit there — see plywood for Yamunanagar.

Buying direct from the manufacturer means one point of contact for the grade, thickness and sheet size you need, including custom sizes, and for block boards and flush doors on the same order.

Ordering for Haryana

Direct from our factory in Jhajjar, Haryana
Thickness 4 mm to 25 mm
8 × 4, 7 × 4 and 7 × 3 ft sheets, plus custom sizes
Grades for interiors, wet areas and fire safety

Get a quote for Haryana +91 98117 51838

Areas we supply

Across Haryana

We supply contractors, dealers, interior designers and homeowners throughout the state. Share your site location with your enquiry and our sales team will confirm availability and dispatch.

Gurugram
Faridabad
Bahadurgarh
Jhajjar
Rohtak
Sonipat
Panipat
Karnal
Hisar
Ambala
Yamunanagar

Choosing plywood for Haryana's conditions

Haryana's hot summers, humid monsoon and cold winters put timber products through wide swings in temperature and humidity. Matching the grade to where the board will be used matters more than buying the most expensive sheet.

Where it will be used	What to choose
Kitchen sink and hob units, bathroom vanities, utility areas	BWP or marine-grade plywood, edges sealed
Wardrobes, beds, shelving and other dry interiors	MR or BWR plywood; 18–19 mm for carcasses and shelves, 6 mm for backs
Long shelves, bed bases and tall wardrobe sides	Block board, which stays straight over long spans
Offices, shops and commercial fit-outs where fire safety is specified	Fire-retardant plywood
Concrete formwork on construction sites	Shuttering plywood
Internal doors	Flush doors, treated against termites and borers

On site, store sheets flat, off the floor and under cover, and let them settle to the room for a day or two before cutting. Not sure which grade you need? Read BWR vs BWP plywood or ask our team when you request a quote.

Product range

What we supply in Haryana

Hardwood plywood

Hardwood veneers for strength, screw holding and a good finish in furniture and interiors.

BWP and marine-grade plywood

Boiling-waterproof bonding for kitchens, bathrooms and other areas that get wet regularly.

Fire-retardant plywood

Treated plywood for commercial interiors and other projects where fire safety is specified.

Block boards and flush doors

Pine and poplar core block boards and IS 2202 flush doors, made in the same factory.

Also supplying

Buying guides

Plywood buying guides

See all guides

Buying Guides4 min read

Shuttering Plywood: Types, Uses and What Affects the Price

A guide to shuttering plywood covering types, uses, the factors that affect its price, and tips for choosing the right plywood for your construction…

Plywood & Boards9 min read

Types Of Plywood For Wardrobes: Choosing The Right Material

Find the best plywood for wardrobes in India: compare MR, BWR, BWP, marine and other types, plus the right thickness, finish and grade for each part.

Plywood & Boards5 min read

Plywood Thickness: Different Types & Sizes In MM & Inches

Get to Know the ideal plywood thickness for your wardrobe, from 3 mm to 25 mm, with different types, sizes, and board options in MM and Inches.

FAQ

Plywood in Haryana: FAQs

Where is the MRS Woodcraft factory in Haryana?

Our factory is on Dehkora Sampla Road in Jhajjar district (Tehsil Bahadurgarh), close to Delhi's western border. Plywood, block boards, flush doors and veneers for customers across Haryana are dispatched from here.

Which plywood should I use for kitchens and bathrooms?

Use BWP (boiling waterproof) or marine-grade plywood anywhere that gets wet regularly — kitchen sink and hob units, bathroom vanities and utility areas. MR or BWR grades are fine for wardrobes, beds and other dry interiors. Seal all cut edges whichever grade you use.

Can I visit the factory to see the plywood?

Yes. The factory near Bahadurgarh is open Mon–Sat, 10:00 am – 8:00 pm. Call +91 98117 51838 before you come so the right person is available to show you the grades and sizes you are considering.

Do you supply shuttering plywood for construction sites in Haryana?

Yes. Along with furniture and interior grades we supply shuttering plywood for concrete formwork. Share the thickness, sheet size and quantity, and the site location, for a quote.

Do you also supply block boards and flush doors?

Yes. We manufacture block boards with pine and poplar cores and flush doors bonded with phenol-formaldehyde resin as per IS 2202, and supply them across Haryana along with plywood and veneers.

How do I get a quote for delivery in Haryana?

Call or WhatsApp +91 98117 51838 or send an enquiry with the product, grade, thickness, quantity and site location. Our sales team will confirm availability, pricing and the dispatch schedule for your location.

Plywood manufacturer in Haryana