Block Board Manufacturer in Haryana & NCR

How it's built

A stiff, light core between quality veneers

Our block boards have a wooden batten core sandwiched between outer veneers, with the grain of the core running perpendicular to the veneers. We use a blend of pine and poplar wood, a double core veneer and original gurjan face veneers.

We take care at every stage: battens are precisely cut and systematically arranged for uniform thickness, materials are selected and treated to resist termite and borer attack, and every board passes multiple checkpoints so it leaves the factory gap-free.

Core	Pine and poplar wood battens
Veneers	Double core veneer, original gurjan face veneer
Adhesive	Boiling-waterproof resin
Treatment	Termite and borer resistant
Finish	Can be painted, polished, veneered or laminated
Sizes	Standard sizes, customisable to your requirement

Where block board works best

Block board is the board to choose when a panel is long, tall or wide and must stay straight. Its solid batten core resists bending far better than particle board or MDF, and it is lighter than plywood of the same thickness, which makes large shutters and panels easier to hang and handle.

Use	Why block board	Usual thickness
Wardrobe sides and shutters	Tall panels stay flat and shutters do not bow	19 mm
Long shelves and bookcases	Spans without sagging under load	19–25 mm
Beds, bed boxes and headboards	Stiff and strong for large panels	19–25 mm
Table tops and study desks	Flat, rigid top that holds screws well	25 mm
Doors, partitions and wall panelling	Light enough to hang, stiff enough to stay true	19–25 mm

Keep block board for dry areas. For kitchen sink units, bathroom vanities and anything that gets wet regularly, use BWP or marine-grade plywood instead.

Block board vs plywood

Block board is lighter and stiffer over long spans, so it is better for shelves, wardrobe sides, beds and doors. Plywood holds up better in moisture, takes detailed cutting and edge screwing more cleanly, and is the safer choice for kitchens and bathrooms. Most interiors use both, each where it suits.

	Block board	Plywood
Core	Solid softwood battens	Thin veneers glued in alternating directions
Long spans	Resists sagging and bowing	Can sag over long, unsupported spans
Weight	Lighter for the same thickness	Heavier
Wet areas	Not recommended	BWP and marine grades are made for them
Detailed cutting	Can chip at the core strips	Cuts cleanly in any direction
Best for	Wardrobes, shelves, beds, doors, table tops	Kitchens, bathrooms, drawers, curved and detailed work

More detail: blockboard vs plywood compared and what block board is.

Choosing block board thickness

19 mm is the everyday thickness for wardrobes, shelves and bed frames. Move to 25 mm for table tops, large bed bases and shelves that carry heavy loads, and use thinner boards only for light partitions and panelling. When in doubt, tell us the span and the load and we will suggest a thickness.

Features & advantages

Why builders choose block board

Block board's stiffness and resistance to bending make it a popular alternative to plywood for furniture and long panels.

Lightweight, low-density material — easy to handle and transport
High screw-holding capacity
Maintains dimensional stability in all weather conditions
Bonded with boiling-waterproof resin
Good resistance to shrinking, splitting and swelling
Provides thermal insulation
Can be painted or polished as needed
Customisable to specific requirements

We supply block boards to contractors, carpenters, interior designers and dealers in Delhi NCR, Haryana, Punjab and Uttar Pradesh, alongside our plywood and flush doors.

Buying guides

Block board guides

See all guides

Plywood & BoardsUpdated 5 Oct 202610 min read

Blockboard Properties & Advantages

Check out blockboard – a durable material perfect for doors, furniture, and interiors. Learn its benefits, applications, and cost factors for your ne…

Buying GuidesUpdated 6 Oct 20266 min read

Gypsum Board vs Plywood: Differences & Cost

Gypsum board (plasterboard) vs plyboard: compare strength, moisture and fire resistance, cost, installation and best uses for walls, ceilings and par…

ComparisonsUpdated 14 Jan 20256 min read

Key Differences Between Plyboard vs Plywood

Explore key differences between plyboard and plywood, including their uses and ideal applications. Learn which material is best suited for project.

FAQ

Block board FAQs

What is block board?

Block board is an engineered wood panel with a core of softwood strips (battens) sandwiched between layers of wood veneer, with the core grain running perpendicular to the face veneers. It is stiff, resists bending and is lighter than plywood of the same thickness.

Is block board or plywood better for wardrobes?

Use block board for tall wardrobe sides, long shelves and doors, where its stiffness stops sagging and bowing. Use plywood for drawers, small parts and anything near water. Many carpenters build the carcass in plywood and the long panels and shutters in block board.

What thickness of block board should I use for a bed?

Most bed frames, headboards and storage boxes use 19 mm block board. For a large bed base or panels that carry heavy loads, use 25 mm. Thinner boards suit light partitions and panelling only.

Can block board be used in a kitchen or bathroom?

Not where it will get wet. Block board suits dry areas — wardrobes, beds, shelving and doors. Use BWP or marine-grade plywood for sink units, bathroom vanities and other areas that get wet regularly.

Does block board get termites?

Untreated softwood cores can attract termites and borers. MRS block boards are made from materials treated to resist termite and borer attack. Keep boards off damp walls and floors and seal cut edges for the best protection.

What is MRS block board made of?

MRS block boards use a blend of pine and poplar wood battens in the core, a double core veneer and original gurjan face veneers, bonded with boiling-waterproof resin.

How do I get a quote for block board?

Call or WhatsApp +91 98117 51838 or send an enquiry with the thickness, size, quantity and site location. Our sales team will confirm availability, pricing and dispatch.

Block board manufacturer in Haryana